-10%

QED Performance Qonduit Power Cord (1.5M) (RM 595)

Shunyata Research
Venom UK-6
Power Distributor
(Made In USA)

RM8,995.00

Categories: Power Supply & Distributor, Shunyata Tags: Free Gift, Shunyata

Overview

The VENOM UK6 is a high performance power distributor designed specifically for the music, film and recording enthusiast, located in regions that require the UK BSI-style mains sockets. High-end home entertainment systems can be very complex and quite costly, yet the performance potential of the entire system can be dramatically affected by the choice of power delivery products including the power distributor. The UK6 has the build quality and reference level performance of much more expensive products.

Sound and recording professionals from around the world agree, Shunyata Research power systems are the finest in their product category.

Requires C19 power cord which is not included.

Features

CCI™ NOISE REDUCTION

Traditional power conditioners are designed to block incoming noise from outside the home, but do not address the noise that is generated by the electronic components themselves. In fact, most conditioners reflect noise back into other components connected to the power conditioner. CCI™ (Component-to-Component Isolation) is one of the most significant but often overlooked aspects to power system performance. The CCI™ filter consists of a proprietary multi-stage filter that reduces electrical noise and interference generated by a component’s power supply.

ArNi® Conductors

Shunyata Research’s ArNi^® conductors are designed to be the finest quality wire available for power and audio purposes. They start life using the highest purity copper available – OFE C10100 (or Ohno single crystal). Then they are formed into “virtual hollow tubes” that we call VTX™. The core of the conductor is completely hollow forcing the current to only travel through the periphery of the conductor, therby eliminating skin effects and random eddy currents.

And finally, every ArNi^® wire undergoes our proprietary KPIP™ process.

Electromagnetic Breaker

Over-current protection is a requirement for today’s high current audio power distributors. The vast majority of manufacturers use an inexpensive thermal fuse or breaker. Both are specifically designed to heat up as the current level rises. This causes voltage drops, increased contact impedance, thermal noise, excessive heat generation and current limiting effects. There is a better solution — the hydraulic electromagnetic breaker that utilizes low-impedance relays and a sensing coil that reads the current level without heating up or limiting current. They can operate right up the to the maximum current level without heating up or limiting instantaneous current. They are rarely used in competitive products since they cost 10-20 times that of a common fuse or thermal breaker.

Premium Grade Sockets

The type and quality of mains socket has a significant impact on performance. The sockets we use in our power conditioners feature massive copper alloy contacts that have superior conductivity compared to brass or bronze used in common sockets and have superior sonic qualities compared to audiophile outlets that use gold, silver, or rhodium plate platings.

The sockets have larger contact surfaces that provides for an incredible grip strength. This improves connection reliability and DTCD — instantaneous current delivery capacity.

They also have expanded internal air gaps that improve cooling when powering high-powered amplifiers. The internal connection method utilizes a high-force clamping mechanism that allows for the use of very large gauge wires.

After years of research into the negative effects of vibration, Shunyata Research developed its own ‌vibration isolation using sub-miniature accelerometers that accurately measures the effects of floor and airborne sound waves. We use it in the development of vibration absorbing materials such as energy absorbing footers, AC outlet gaskets and chassis dampeners that reduce resonant vibration. Recognizing that vibration control is important to overall performance, our chassis are made with optimally dampened steel and aluminum, rather than plastic or thin-wall sheet metals.

KPIP™ PROCESSING

Shunyata Research’s proprietary Kinetic Phase Inversion Process includes four days of continuous KPIP™ processing to dramatically reduce burn-in time and significantly improve sonic performance, delivering a relaxed and life-like presentation.

Sonic Welding

Simple crimping, soldering, brazing and screws are all inferior methods of joining two wires or terminals together. Sonic welding uses high-energy sonic waves to literally join two metals together at a molecular level and cold-welding uses high-energy pneumatic pressure to bond metals. Shunyata Research uses both methods to secure connections that do not degrade over time.

Cryogenic Processing

Shunyata Research operates its own onsite Cryogenics International computer-controlled cryogenic plant. Liquid nitrogen is used to reduce the temperature of the contents to -320 degrees Fahrenheit. The computer monitors and lowers the temperature by a single degree at a time to prevent thermal shock.

We use this process to improve the performance of connectors and various electrical components that are used in our power products and signal cabling.

For more information:

Contact : Dicky Ng 012-3308893
Contact : John Yew 016-2861000
Email : [email protected]

CMY

Average rating:

0 reviews

CMY

Average rating:

0 reviews

Weight	4 kg

Specification

INPUT/OUTPUT VOLTAGE

– Max Input: 240 V~

– Output: 240 V~ unregulated

CURRENT RATINGS

– Max continuous current: 13 Amps

– Peak instantaneous current: >100 Amps @ 8.33ms

OVER CURRENT PROTECTION

– Hydraulic electromagnetic breaker

TRANSIENT SUPPRESSION

– NextGEN TMOV Transient Protection

– 40,000 Amps @ 8/50μs

SOCKETS / CONNECTORS

– INLET: IEC 60320 C20

– 6 UK BS-1363 (3-pin, 13A, fused)

WIRING SYSTEM

– Dual VTX conductors (6 mm²)

– OFE C10100 Copper (Certified ASTM F68)

– KPIP Processed

TECHNOLOGY

– Trident v3 Module

– CCI™ v3 Noise Filter

NOISE SUPPRESSION

Line-outlet: > 24db (100 kHz – 30 MHz)

CONSTRUCTION

– 16 Gauge Powder Coated Steel Chassis

– Stainless steel top plate

– Vibration Dampening (internal)

– AC Outlet Dampening Gaskets

– Shunyata Isolation Footer

DIMENSIONS

– Width: 52.07 cm

– Depth: 9.00 cm

– Height:12.5 cm

– Weight: 3.4 kg

CMY

Average rating:

0 reviews

Reviews

There are no reviews yet.

Be the first to review “Shunyata Research
Venom UK-6
Power Distributor
(Made In USA)” Cancel reply

You must be logged in to post a review.

Shunyata Research Venom UK-6 Power Distributor (Made In USA)

CCI™ NOISE REDUCTION

ArNi® Conductors

Electromagnetic Breaker

Premium Grade Sockets

KPIP™ PROCESSING

Sonic Welding

Cryogenic Processing

Specification

Reviews

Be the first to review “Shunyata Research Venom UK-6 Power Distributor (Made In USA)” Cancel reply

Related products

Shunyata Research
Venom UK-6
Power Distributor
(Made In USA)

Be the first to review “Shunyata Research
Venom UK-6
Power Distributor
(Made In USA)” Cancel reply