Clearaudio Cartridge Break In Test Record 180g LP (2)

Clearaudio Cartridge Break In Test Record 180g LP (1)

Clearaudio
Cartridge Break In
Test Record 180g LP

(Pre-Order)
" href="https://www.cmy.com.my/shop-online/pro-ject-audio-systemsrecord-puck-promade-in-europe/">

RM395.00

Category: Turntable Accessories Tag: Clearaudio

Overview

To reach their full sonic potential, a phono cartridge needs a certain ” running-in” period, which can range from 40-100 hours – this LP shortens this considerably, allowing you to enjoy the best of your music sooner. This record contains Pink Noise (1/f noise), which reduces the length of the “running-in” period, along with an anti-skating check, total system noise check, frequency response check, and more.

Multiple endless grooves of pink noise for cartridge break-in and other tracks for cartridge set-up!

Phono cartridges usually need a running-in period to reach their full potential. This can take anywhere from 40 to 100 hours, depending upon the manufacturer, design and construction of the phono cartridge. This Clearaudio Cartridge Break-In Record is a unique tool. Playing an endless groove cut with pink noise significantly reduces the length of the break-in period.

Six continuous pink noise tracks are provided at various positions on the record (track numbers are 5, 6, 7, 9, 10 and 11). To enable frequency response measurement of the phono cartridge, track 3 comprises a sine-wave frequency sweep from 20 Hz to 20 kHz.

There are two separate 240-second tracks containing a pink noise signal for measuring and testing the set-up of the whole system. Tracks 4 and 13 are recorded with no signal to test the noise floor of the entire hi-fi system.

Finally, tracks 8 and 12 contain a special signal to optimize and adjust the anti-skating force. Both channels are recorded with a 316 Hz sine-wave with continually changing phase difference from 0 to 360 deg, so that the stylus movement repeatedly changes from lateral to vertical and back again. The signal level changes accordingly from -22 dB to +8 dB, corresponding to a maximum velocity of 9.81 cm/s or a maximum displacement of 50 lm, horizontally or vertically.

Selections:

1. No Signal, Concentric Groove For Eccentricity Check

2. 1 kHz, Starting Signal

3. Sweep, Frequency Response Check: 20 Hz to 20 kHz

4. No Signal, Total System Noise Check

5. Pink Noise, Cartridge “Break In”

6. Pink Noise, Cartridge “Break In”

7. Pink Noise, Cartridge “Break In”

8. 316 Hz (0 to 360 Degrees), Anti-Skating Check

9. Pink Noise, Cartridge “Break In”

10. Pink Noise, Cartridge “Break In”

11. Pink Noise, Cartridge “Break In”

12. 316 Hz (0 to 360 Degrees), Anti-Skating Check

13. No Signal, Total System Noise Check

14. Pink Noise, Cartridge “Break In”

15. No Signal, Concentric Groove For Eccentricity Check

For more information:

Contact : Dicky Ng 012-3308893
Contact : John Yew 016-2861000
Email : [email protected]

CMY

Average rating:

0 reviews

CMY

Average rating:

0 reviews

Weight	1 kg

Reviews

There are no reviews yet.

Be the first to review “Clearaudio
Cartridge Break In
Test Record 180g LP” Cancel reply

You must be logged in to post a review.

Clearaudio Cartridge Break In Test Record 180g LP

Reviews

Be the first to review “Clearaudio Cartridge Break In Test Record 180g LP” Cancel reply

Related products

Clearaudio
Cartridge Break In
Test Record 180g LP

Be the first to review “Clearaudio
Cartridge Break In
Test Record 180g LP” Cancel reply