Overview
The ZENSOR 5 AX is based on the technology of the ZENSOR 5. They share the same passive crossover, which is paramount for getting the characteristic ZENSOR sound quality. The build-in amplifier is integrated in the left speaker, while the right speaker is a passive ZENSOR 5 speaker.
Features
| Weight | 26 kg |
|---|---|
| Finishes | Black, White |
| Product series | ZENSOR |
|---|---|
| Frequency Range (+/-3 dB) [Hz] | 43 – 26,500 |
| Maximum SPL [dB] | 106 |
| Crossover Frequency [Hz] | 2,400 Hz |
| Crossover Principle | 2-way |
| High frequency driver, Quantity | 1 x 25 mm |
| High frequency driver, Diaphragm type | Soft Textile Dome |
| Low frequency driver, Quantity | 2 x 5.25″ |
| Low frequency driver, Diaphragm type | Wood Fibre Cone |
| Enclosure type | Bass Reflex |
| Amplifier Type | Fully digital class D (Open loop type) |
| Input Impedance [ohms] | 12.6k |
| Connection Input | 3.5 mm Mini Jack Optical (Toslink) |
| Connection Output | SUB Out |
| Wireless Input(s) | Bluetooth™ Apt-X |
| Max. Digital Resolution [bits/KHz] | 24 / 96 |
| Magnetic Shielding | No |
| Recommended Placement | Floor Bluetooth |
| Recommended Distance From Wall [cm] | 20 – 80 |
| Max. Power Consumption [W] | 160W |
| Standby Power Consumption [W] | <0.5W |
| Dimensions With Base (HxWxD) [mm] | 825 x 162 x 282 |
| Weight [kg] | 11.0 |
| Accessories Included | Manual Mains Cable Remote Control Speaker Wire (For Right Speaker) Spikes Rubber Feet |
| Analogue Input Sensitivity [mV] | 300 |
| Continous IEC Amplifier Output [RMS watt] | 2 x 50W |
| Input Mains Voltage [Volts] | Universal mains 100 – 240V |
You must be logged in to post a review.
Cables
Speaker Cables
Isolation Base/Feet
Anti Vibration Base / Feet / Cone
Entreq
Vibb Eater Mini
For Equipment 10 – 20kg
(Pair)(Made In Sweden)
Anti Vibration Base / Feet / Cone
Entreq
Vibb Eater Maxi
For Equipment 30kg-40kg
(Pair)(Made In Sweden)
Reviews
There are no reviews yet.