We give you the easiest way to add deep bass wirelessly
Living LV-SUB is the perfect partner to the Living wireless speakers if you have a need for more bass. Like all speakers in the Living-series, LV-SUB has built-in high quality wireless receiver. Installation is very easy, LV-SUB joins an existing Audio Pro network automatically. Just plug into power and you are done! Volume is controlled via LV remote in the network. Wireless range is 20-50m indoors, 100 m in line of sight.
LV-SUB performs a powerful and well balanced bass. On its rear are manual controls for crossover frequency and bass level (+/- 20dB), and also switches for channel (House Code) and volume Zone.
The exterior is designed to match Living speakers with beautiful rounded corners and covered in lush leather.
- Built-in wireless receiver
- Automatically joins existing Audio Pro network
- Luxorious encasing in white or black leather
- Wireless full CD quality sound
- Remote controlled via Living loudspeakers
- Easy setup, get wireless music in seconds
- Range indoors: room to room up to 20 m
- Range indoors: same room up to 50 m
- Range open field: up to 100 m
- No audible delays in network transmission
- Works with both Mac and PC
- Plug ‘n play, no software needed
- Extensive multiroom possibilities
- RF band: 2.4GHz
- Sample rate: 48 KHz
- Dedicated proprietary protocol network
Fully Imported from Sweden
Come with USB Transmitter Dongle
Hang It on Walls
Easily hang LV-SUB Flat on walls with the enclosed wall brackets.
It’s as Easy as Counting to Three
We design our products to be very easy to use. That’s why our speakers need only power; our wireless units need no software and our transmitter only a sound source. Connect the speakers to power, connect the transmitter to your computer (or other device) and play your music. It’s as simple as that!
Go Wireless or Wired
Besides working as a wireless subwoofer in the Living network, LV-SUB Flat can be used as an ordinary subwoofer: Connect to any receiver/speaker with a subwoofer output.
Automatically Connects to Network
LV-SUB Flat is very easy to install, it connects itself automatically to your existing wireless Living network. Just plug into socket, and you are done! Volume is adjusted in the network via all other Living speakers.
Wireless Audio from Whatever
Our flexible wireless transmitter makes it possible to connect to any soundsource. You can connect it directly to your computers USB port or to your stereo or iPod-, iPhone- and iPad-dock via 3.5 mm stereo cable. Done! Now you can enjoy perfect wireless sound. You can connect any soundsoruce which has a sound output (such as headphones out) to the transmitter, and all powered speakers which has line in to the receiver (separate USB powersupply is needed if the unit doesn’t have USB power supply.)
Multiroom with Volume Zones
With Living speakers you can divide each House Code into three different volume zones. You can have one volume setting in your living room, another in the kitchen, and a third in the bedroom – all using the same source and House Code. A volume zone can also be an entire floor in your home. The volume in the each zone can be adjusted on all the speakers within that zone provided they have the same House Code setting. To adjust the volume of all speakers in another zone, you have to switch zone on the Living remote control handset. A master volume on the handset will control all zones at the same time.
- Contact : Dicky Ng 012-3308893
- Contact : John Yew 016-2861000
- Email : email@example.com