Audio Research
Reference 160M
Mono Power Amplifier
(Made In USA) (2 units Preloved)
(New was RM142,000)
RM69,000.00
Description – Reference 160M Mono Amplifier …..
After two years in development, the new Reference 160M Monaural Power Amplifier is built like no other, looks like no other, and sounds like no other amplifier that you have ever heard, but it is unmistakably Audio Research. It features a refined audio topology with fewer and better
components in the signal-path than in previous designs, switchable Ultralinear/Triode operation, proprietary auto bias, output tube monitoring and protection, an advanced power meter, and much more. This array of features has never been offered before in an Audio Research amplifier.
The designers at Audio Research wanted to create a new style that would complement the look of the REF6 preamp while also featuring a transparent faceplate that allows a view of the glowing KT150
vacuum tubes. While the GhostMeter™ allows you to see the output tubes, it also incorporates an innovative dual-layer construction with distinctively etched markings that create an integrated power
meter. The power meter’s output-level markings illuminate via hidden LEDs, and the illumination brightness is adjustable.
- Contact : Dicky Ng 012-3308893
- Contact : John Yew 016-2861000
- Email : [email protected]
| Weight | 60 kg |
|---|
Specification
Reference 160M Mono Amplifier
| Power Output: | 140 watts continuous from 20Hz to 20kHz. 1kHz total harmonic distortion typically 1% at 140 watts, below 0.04% at 1 watt. (Note that actual power output is dependent upon both line voltage and “condition” i.e.:if power line has high distortion maximum power will be affected adversely although from a listening standpoint this is not critical). |
| Power Bandwidth: | (-3dB Points) 5Hz to 70kHz. |
| Frequency Response: | (-3dB points at 1 watt) 0.5Hz to 110kHz. |
| Input Sensitivity: | 2.4V RMS Balanced for rated output. (25.5 dB gain into 8 ohms). |
| Input Impedance: | 300k ohms Balanced; 100k ohms Single-ended. |
| Output Polarity: | Non-inverting. Balanced input pin 2+ (IEC-268). |
| Output Taps: | 16 ohms, 8 ohms, 4 ohms. |
| Output Regulation: | Approximately 0.6dB 16 Ohm load to open circuit (Damping factor approximately 14). Overall Negative Feedback: 14dB. Slew Rate: 13 volts/microsecond RISE TIME: 2.0 microseconds. |
| Power Requirements: | 105-130VAC 60Hz (210-250VAC 50Hz) 400 watts at rated output 700 watts maximum 260 watts at “idle” 1 watt off. Tube Complement: 2 matched pair KT150 (Power output V1-4); 2 6H30 (Gain stage V5 and V6). |
| Dimensions: | Width 19.0” (48.26 cm) Height 10.25” (26 cm) Depth 18.5” (46.4 cm). With Handles and Connectors: 20.75” (52.7 cm). |
| Weight: | 56lbs (25.5 kg) Net |
Be the first to review “Audio Research
Reference 160M
Mono Power Amplifier
(Made In USA) (2 units Preloved)
(New was RM142,000)”
You must be logged in to post a review.
Related products
Floorstand Speaker
Audio Pro
Subwoofer
AV Receivers / Amplifiers
Usher Audio
Au – 8500 II
Integrated Amplifier
(missing 1pc. Input knob)
(New Was 3,980)
Floorstand Speaker
*PROMOTION ITEMS*
*DISPLAY/PRE-OWNED*
Metronome Technologie
Le-Player 2S
CD Player
(Made In France)
Accessories
Floorstand Speaker
Speaker
AV Receivers / Amplifiers
Remote
AV Receivers / Amplifiers
Headphone Amplifier
Preamplifier
In-Ear Phone
Floorstand Speaker
Accessories
*PROMOTION ITEMS*
Active Speaker
Media Player
Reviews
There are no reviews yet.