Language
 
 
Primaluna Dialogue Premium Integrated Amplifier
 
 

Primaluna Dialogue Premium Integrated Amplifier

The DiaLogue Premium series has set the bar for what an all-tube integrated amp should be: Sexy... exotic... and built with exceptional features not found in any other amp in its class including:

  • Adaptive AutoBias . As with all PrimaLuna amps, you never have to worry about biasing your amp ever again. You can even just flip a switch, and the board is re-calibrated for EL34s, KT88s or KT120s. Every DiaLogue Premium Series amplifier can be ordered with either set of power tubes installed.
  • All critical signal paths are wired with silver-plated, oxygen-free continuous crystal (OCC) copper with a Teflon dielectric for superior signal speed and increased clarity.
  • Premium parts from around the world including ALPS volume control and Takman resistors from Japan, and SCR tin foil capacitors made in France.
  • Exclusive AC Offset Killer. This piece reduces transformer hum, resulting in lower noise and the blackest background ever.
  • New front-end circuitry. The DiaLogue Premium uses three 12AU7 tubes per channel, plus further refinements to the ProLogue Premium circuit. The result is even lower distortion and increased bandwidth.
  • Dedicated subwoofer output. If you're favorite sub only uses line-level inputs, such as the JL Audio subwoofers, the DiaLogue Premium Integrated makes it simple to use!
  • Triode/Ultralinear switching. Allows you to switch how the power tubes operate on the fly.
  • All the features found in the award-winning ProLogue Premium Series: Full-function remote, Home theater bypass circuitry, all in an amp that is point-to-point wired and designed conservatively to extend the life of your tubes as well as critical components inside the amp.

The DiaLogue Premium Series also includes the same innovative circuits found in the ProLogue Premium series, that protect the amp at every level:

  • BTI-circuit. BTI stands for "Bad Tube Indicator." On the chassis’ deck in front of each power tube, is a small LED that lights up if the tube goes bad. This circuit works hand-in-hand with the new Adaptive Auto-Bias circuit.
  • PTP-circuit. If the power transformer should overheat, this "Power Transformer Protection" circuit cuts primary power, allows the amp to cool down, then resets itself.
  • OTP-circuit. The "Output Transformer Protection" circuit protects the output transformers in the event of a massive tube failure or user error.
  • +B relay. Replaces the plate fuse and works in conjunction with the OTP-circuit to protect the amp against tube failure. This method is less intrusive sonically and the relay resets itself once the faulty tube is replaced.

As with all PrimaLuna components, the DiaLogue Premium Integrated is made by hand with the finest point-to-point wiring and quality equal to—or better than—any product you can buy at any price. All packaged in a high-gloss, hand-rubbed finish.

 

 

SPECIFICATIONS :

Freq. Response (+/- 1dB):  5Hz-69kHz (KT120), 5Hz-32kHz (KT88), 5Hz-30kHz (EL34) 

Input Sensitivity:    280mV (KT120), 240mV (KT88), 230mV (EL34)

Input Impedance:  100k Ohm

Power Consumption:  255 watts

Dimensions: 15 " x 8.3 " x 14.2" (WxHxD)

Weight:  63.8 lbs

Inputs:  5 pair RCA / 1 pair HT bypass

Outputs:  4 & 8 Ohm output taps

RCA Subwoofer output

Tube Compliment: 6 - 12AU7, 4 - EL34

KT88 or KT120 tubes also available

 

For more information:

Contact : Dicky Ng 012-330 8893

Email : dickyng@cmy.com.my

Available Options:
Stock Availability : Available
Qty :
 

 
 
Copyright © 2016 CMY Audio & Visual. All Rights Reserved.