Primare A32 Power Amplifier

With the mighty A32 Primare has set foot on truly esoteric ground. This is a massive fully balanced design capable of controlling the most demanding low-sensitivity speakers - even at the very highest volume levels. The specification is impressive. Equipped with a 2kVa toroidal transformer featuring four separate windings, two for each (L/R) channel; a reservoir of 90.000 uF and sixteen bipolar output devices per channel, the A32 is undeniably an elite amplifier in the classic Primare dual/mono mould. Both balanced and unbalanced inputs are provided, as well as twin speaker terminals for bi-wiring, a trigger input and RS232C inputs. If the unbalanced inputs are used the A32 converts the signal to balanced, to take full advantage of its balanced design.

Technical Specifications

Output Power
2 x 250 W / 8 Ohm
2 x 400 W / 4 Ohm
Analogue Inputs
1 XLR (L & R)
1 RCA (L & R)
Speaker Terminals
4 - 16 Ohm
Input Impedance
15 kOhm
Output Impedance
< 0.025 Ohm
26dB unblanced, 20dB balanced
Frequency Response
20Hz - 100kHz, -0.5dB
< 0.002% (1kHz, 10 W, 8 Ohm)
Signal-to-Noise Ratio, Line
< 100 dBr
Other Inputs
4 - 12 V Trigger
Power Consumption
Off but mainswitch On < 2 W
Standby < 50 W
Operate idle 170W
Dimensions (WxDxH)
430 x 546 x 216 mm
40 kg



















For more information : 

Contact : Dicky Ng 012-3308893

Email :

Available Options:
Stock Availability : Available
Qty :

Copyright © 2016 CMY Audio & Visual. All Rights Reserved.